logo
Σπίτι > προϊόντα > Εξοπλισμός δοκιμής ευφλέκτου >
BS 476 Part 7 Building Material Surface Flame Spread Test Apparatus Electronic

BS 476 Part 7 Building Material Surface Flame Spread Test Apparatus Electronic

BS 476 Part 7 flame spread tester

electronic flame spread test apparatus

building material flammability testing equipment

Τόπος καταγωγής:

Γκουανγκντόνγκ, Κίνα

Μάρκα:

YUYANG

Επικοινωνήστε μαζί μας
Ζητήστε ένα απόσπασμα
Πληροφορίες για το προϊόν
Ακρίβεια:
±1%
Εξουσία:
200W
Κατηγορία Προστασίας:
IP67
Δυναμικό:
110V, 220V
Αέρια καύσης:
Προπάνιο ή φυσικό αέριο
Ροή Νερού Ψύξης:
12L/λεπτό
Ροή αερίου:
1500 ± 200 ml/min
Ύψος φλόγας:
75mm ~ 100mm
Μέγεθος δείγματος:
885mm X 270mm
Τροφοδοτικό:
AC220V, 50HZ
Βάρος:
400 κιλά
Ακτινοβόλο μέγεθος επιτροπής:
850mm x 850mm
Διάμετρος σωλήνα καυστήρα:
3,0 mm (εσωτερικό), 6,4 mm (εξωτερικό)
Έκθεση σε φλόγα:
28 ± 2 mm
Θερμοκρασία δείγματος:
≤35℃
Επισημαίνω:

BS 476 Part 7 flame spread tester

,

electronic flame spread test apparatus

,

building material flammability testing equipment

Όροι πληρωμής και αποστολής
Ποσότητα παραγγελίας min
1
Συγγενικά προϊόντα
Επικοινωνήστε μαζί μας
86-769-26622869
Επικοινωνήστε τώρα
Περιγραφή του προϊόντος
BS 476 Part 7 Building Material Surface Flame Spread Test Apparatus
This electronic testing apparatus is designed for British building materials and high iron flame retardant testing, conforming to BS 476-7 standards. The equipment determines the classification of surface flame spread for wall and ceiling products by measuring critical heat flux through controlled radiant heat exposure and flame ignition.
Testing Method
Samples are ignited in the combustion chamber using gas-fired radiant panels and medium-sized gas burners. The radiation intensity at 75mm distance is 32.5kW/m², with torch flame heights of 75-100mm applied to samples. Samples undergo 10 minutes of radiant heat exposure, with flame propagation levels recorded at 1.5 and 10 minutes. Results are classified into four grades, with higher grades indicating greater fire risk and restricted use in building materials.
Compliance Standard
BS 476 Part 7:1997+AC: 2014 Fire tests on building materials and structures - Method of test to determine the classification of the surface spread of flame of products
Key Features
  • Stainless steel frame structure with corrosion-resistant construction
  • Electronic ignition system with automatic flameout and safety monitoring
  • Removable stainless steel exhaust pipe for easy thermocouple cleaning
  • Precision burner tube: 3.0mm internal diameter, 6.4mm outer diameter
  • Flame positioning: 28±2mm above sample, 6mm above exposed surface bottom
  • Adjustable flame height: 75mm-100mm from sample connection
  • Standard sample size: 885mm × 270mm
  • Radiant panel mounted at 1250mm height from ground
  • 90-degree radiation plate configuration per BS476-7 standards
  • 850mm×850mm porous refractory radiant panel for complete gas combustion
  • Water-cooled steel panel chuck with temperature control (max 35°C)
  • Cooling water flow rate: 12L/min
  • Gas flow rate: 1500±200ml/min
  • Adjustable sample positioning for flexible testing angles
  • Automatic power output control based on test duration
  • Computerized data processing and test report printing
Technical Specifications
Parameter Specification
Cooling Water Flow Rate 12L/min
Gas Flow Rate 1500±200ml/min
Sample Size 885mm × 270mm
Flame Height from Sample 75mm-100mm
Power Supply 220V 50Hz
Weight 400kg
Combustion Gas Propane or Natural Gas (Customer specified)
Additional Equipment Air blower included
Control System
  • Independent electrical control cabinet
  • 17" touch screen with LabVIEW control system
  • Intelligent testing interface for easy operation
  • Precision imported gas meter for accurate flow control
  • Automatic radiation calibration and experimental control
  • Automatic data saving and flexible printing options
  • Includes brand computer system
BS 476 Part 7 Building Material Surface Flame Spread Test Apparatus Electronic 0
BS 476 Part 7 Building Material Surface Flame Spread Test Apparatus Electronic 1
BS 476 Part 7 Building Material Surface Flame Spread Test Apparatus Electronic 2
BS 476 Part 7 Building Material Surface Flame Spread Test Apparatus Electronic 3
BS 476 Part 7 Building Material Surface Flame Spread Test Apparatus Electronic 4
BS 476 Part 7 Building Material Surface Flame Spread Test Apparatus Electronic 5
Manufacturer Information
DONGGUAN YUYANG INSTRUMENT CO., LTD is located in Wanjiang District, Dongguan City, Guangdong Province, China - a region known for its prosperous industry and convenient transportation. As a high-tech enterprise, we specialize in developing and manufacturing fire testing equipment, building material fire testers, wire and cable fire testers, environmental test chambers, textile testing equipment, and toys testing equipment.
Decades of research and development have established YUYANG as a leader in high-quality, cost-effective testing equipment. Our products serve various industries including scientific institutions, colleges, inspection agencies, auto parts, electronics, electrical components, lithium batteries, LED, photoelectric devices, mobile technology, plastics and rubber, display technology, telecommunications, chemicals, aerospace, building materials, wire and cable, toys, furniture, and textiles.
All YUYANG testing equipment is designed according to international standards including ISO, ASTM, DIN, EN, GB, BS, JIS, ANSI, UL, TAPPI, AATCC, IEC, VDE, CSA, and CEN. We look forward to cooperating with customers worldwide and welcome inquiries about our products or custom orders.

Στείλτε το αίτημά σας απευθείας σε εμάς

Πολιτική απορρήτου Κίνα Καλή ποιότητα Εξοπλισμός δοκιμής ευφλέκτου Προμηθευτής. 2017-2026 DONGGUAN YUYANG INSTRUMENT CO., LTD Όλα τα δικαιώματα διατηρούνται.